校 岑,顾伯勤,邵春雷.熔盐密度对熔盐泵性能的影响[J].轻工机械,2014,32(4): |
熔盐密度对熔盐泵性能的影响 |
Effects of Molten Salt Density on the Performances of Molten Salt Pump |
|
DOI: |
中文关键词: 熔盐泵 密度 外特性 内部流动 数值模拟 |
英文关键词:molten salt pump density external performance internal flow numerical simulation |
基金项目:国家自然科学基金资助项目(51306087);江苏省自然科学基金资助项目( BK2012430) |
|
摘要点击次数: 1434 |
全文下载次数: 1288 |
中文摘要: |
基于标准K-ε湍流模型、多重参考坐标系和SIMPLE算法,采用FLUENT数值模拟软件,对3台不同比转速的熔
盐泵,针对4种密度不同的介质在5种不同流量下分别进行数值模拟,预测了相应工况下熔盐泵的水力性能。结果表
明,泵的扬程与密度变化无关,但相同流量下同一泵的轴功率和效率会随着密度的增加相应上升,泵内静压与速度分布
规律基本一致。研究结果对熔盐泵的设计具有一定的参考价值。 |
英文摘要: |
Based on the standard K-E turbulent model, multiple reference frame coordination and the SIMPLE algorithm,
three-dimensional turbulence flow in 3 molten salt pumps for 4 different density mediums were simulated under 5
different flow rates by using FLUENT. The performances of the pump were predicted. The results show that the head
doesn't change with density. The shaft power and efficiency increase with the increase of density under the same flow
rates. The distribution regularities of static pressure and absolute velocity for different pumps transporting different
density mediums are basically the same. The results have a certain reference value to the design of molten salt pump. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |