郑凌晨,陈洪立,李晓明,金玉珍.一种双层多节细长棒式棉纤维力学模型[J].轻工机械,2015,33(5): |
一种双层多节细长棒式棉纤维力学模型 |
A Mechanical Model of Double-Layer and Multiple-Class Cotton Fiber |
|
DOI:IO. 3969/j . issn. 1005 -2895. 2015. 05. 006 |
中文关键词: 棉纤维 力学模型 微观结构 拉伸特性系数 |
英文关键词:cotton fiber mechanical model microscopic structure drawing coefficient |
基金项目:国家自然科学基金项目( 51205363);浙江省自然科学基金项目(LY15E050027);浙江省自然科学基金项目(L214E050004) |
|
摘要点击次数: 1184 |
全文下载次数: 1128 |
中文摘要: |
空气一纤维两相流的研究中,由于纤维模型不能完全真实地反映棉纤维的物理特性,因此数值模拟研究存在一定
的局限性。为了更准确地模拟棉纤维在气流场中运动,分析前人建立的纤维模型,采用高倍光学显微镜系统观测棉纤维
的微观结构,综合考虑棉纤维拉伸、扭转、弯曲、塑性、摩擦性等力学特征,提出一种双层多节细长棒式的棉纤维结构模
型。推导了相关的力学关系式,提出了该纤维结构模型中反映纤维力学性能的拉伸特性系数Ks、弯曲特性系数Kc、扭转
特性系数Kt、摩擦特性系数μ直径变化率ε共5个参数。该模型具有全面的纤维力学特性,完善了空气一纤维两相流问
题中棉纤维模型,文中的研究提高了数值模拟的真实性和准确性 |
英文摘要: |
ln order to simulate the motion of cotton fiber in the airflow accurately, the model of fibers established was
expounded by domestic and overseas researchers. and adopted the system of high-power optical microscope to observe
the microscopic structure of cotton fiber. Considering the mechanical characteristics of cotton fiber. such as tension.
torsion. bending, plastic, a model of cotton fiber which was double-layer and multiple-class was put forward. The
related mechanics equation was deduced. and it put forward five parameters which were drawing coefficient Ks , bending
coefficient Kc , reversing coefficient Kt , friction coefficient μ and diameter rate ε. The model possesses comprehensive
mechanical characteristics. and it improves the research efficiency in two-phase flow problem. It improves the
authenticity and accuracy of numerical simulation. |
查看全文 查看/发表评论 下载PDF阅读器 |
关闭 |