欢迎访问《轻工机械》稿件在线采编系统!设为首页 | 加入收藏    
信息公告:  
文章检索:
稿件处理系统
期刊信息
  • 中国标准连:ISSN1005-2895
  • 续出版物号: CN 33-1180/TH
  • 主管单位:轻工业杭州机电设计研究院有限公司
  • 主办单位:轻工业杭州机电设计研究院有限公司、中国轻工机械协会、中国轻工业机械总公司
  • 社  长:刘安江
  • 主  编:黄丽珍
  • 地  址:杭州市余杭区高教路970号西溪联合科技广场4-711
  • 电子邮件:qgjxzz@126.com
理事单位          MORE>>
周莲.超声磨削中电信号非接触传输特性参数研究[J].轻工机械,2018,36(5):63-67
超声磨削中电信号非接触传输特性参数研究
Study on Non Contact Power Transmission Characteristic Parameters of Electrical Signals in Ultrasonic Grinding
  
DOI:10.3969/j.issn.1005 2895.2018.05.012
中文关键词:  电信号非接触传输装置  传输效率  自感  分布电容
英文关键词:electrical signal non contact transmission device  transmission efficiency  self inductance  distributed capacitance
基金项目:
作者单位
周莲 苏州科技大学 机械工程学院 江苏 苏州215009 
摘要点击次数: 1412
全文下载次数: 1101
中文摘要:
      为了提高超声磨削加工系统中非接触电能传输系统电能传输的效率,建立了电信号非接触传输装置感应模型,推导了超声系统电信号 非接触传输装置传输效率和总输入阻抗的表达式,从理论上分析了分布电容和线圈自感对电能传输效率和输出阻抗的影响。实验结果表明通过改变线圈绕组的结 构、调整瓷罐间隙可以提高传输效率,获得最大有效功率。
英文摘要:
      Aiming at improving the efficiency in the non contact power transmission system of ultrasonic grinding system, an induction model of electrical signal non contact power transmission device was established. The equation of transmission efficiency and total input impedance of the non contact transmission power device of the electrical signals in ultrasonic system were derived. The influence of distributed capacitance and coil self inductance on power transmission efficiency and output impedance were theoretically analyzed. The experimental results show that the transmission efficiency can be improved to obtain the maximum effective power by changing the structure of the coil winding and adjusting the gap of the porcelain tank.
查看全文  查看/发表评论  下载PDF阅读器
关闭