| 林圣全， 丁云斌， 李嘉渊， 谢林君.出风罩结构改型设计对多翼离心风机性能的影响[J].轻工机械,2019,37(1):88-93 |
| 出风罩结构改型设计对多翼离心风机性能的影响 |
| Influence of Exhaust Hood Retrofit Design on Performance of Multi Blade Centrifugal Fan |
| |
| DOI：10.3969/j.issn.1005 2895.2019.01.017 |
| 中文关键词: 多翼离心风机 出风罩倾斜角 降噪 有效流通面积 ANSYS FLUENT软件 |
| 英文关键词:multi blade centrifugal fan exhaust hood angle noise reduction effective circulation area ANSYS FLUENT |
| 基金项目: |
|
| 摘要点击次数: 1050 |
| 全文下载次数: 1009 |
| 中文摘要: |
| 为了改善小型多翼离心风机出口存在的气流死角及大面积旋涡现象，在原风机结构基础上通过调整出风罩倾斜角对其进行改型设计，并结合数值模拟和实验测量的方法，研究出风罩改型设计对多翼离心风机性能的影响。结果表明：根据出口气流组织分布特点对出风罩倾斜角作相关调整， 能够有效改善风机内部流体流动情况，减小旋涡强度及其影响区域，增大有效流通面积进而达到提高风机性能及优化噪声的效果。分析改型前后风机气动性能和噪声测试结果可知，改型风机出口静压提升约20 Pa，最大全压效率较原型机提升约4.7%。同时，由于出风罩倾斜角度的增加减小了叶轮出流对风机出口左侧壁面的冲击，从而使风机气动噪声得到控制，各频段A计权声压级平均降低3.5 dB。研究结果证明该出风罩结构改型设计方法不仅能提高风机性能，还能达到降低噪声的效果，具有一定工程应用价值。 |
| 英文摘要: |
| In order to improve the airflow dead angle and large area vortex phenomenon at the exit of the small multi blade centrifugal fan, the exhaust hood angle was adjusted on the basis of the original fan structure. And combined with numerical simulation and experimental measurement methods, the influence of the exhaust hood modification design on the performance of the multi blade centrifugal fan was studied. The results show that according to the distribution characteristics of the outlet air distribution, the relative adjustment of the inclination angle of the exhaust hood can effectively improve the flow of the fluid inside the fan, reduce the vortex intensity and its influence area, and increase the effective circulation area to improve the performance of the fan and optimize the effect of the noise. Analysis of the aerodynamic performance and noise test results of the fan before and after the modification shows that the static pressure of the modified fan outlet is increased by about 20 Pa, and the maximum total pressure efficiency is about 4.7% higher than that of the prototype. At the same time, due to the increase of the inclination angle of the exhaust hood, the impact of the impeller outflow on the left wall surface of the fan outlet is reduced, so that the aerodynamic noise of the fan is controlled, and the sound pressure level of the A weight is reduced by 3.5 dB on average. The research results show that the modified design method of the hood can not only improve the performance of the fan, but also achieve the effect of reducing noise, which has certain engineering application value. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
